Chinese Centrifugal Pump 304 LB5-1.5 Mechanical Seal Replacement: 32mm CA/SC/EPDM FDA
Chinese Centrifugal Pump 304 LB5-1.5 Mechanical Seal Replacement: 32mm CA/SC/EPDM FDA
A real job from November 2026 at Big S Brewery Services.
Chinese built centrifugal pumps are turning up in more UK breweries and food plants every year. The pumps do their job. The problem comes later, when the mechanical seal wears out and there is no UK spare on the shelf. That was the call this month from Big S Brewery Services in the North West: a Chinese centrifugal pump, 304 LB5-1.5, built by Liyang Sifang, with an ABB IE3 motor and a single seal. The seal had worn and the face was scored.
Identifying the replacement seal for the 304 LB5-1.5
We met the engineer, examined the old seal and measured it. We identified the replacement from the seal itself: the dimensions, the materials and the duty it has to survive.
32mm CA/SC/EPDM FDA approved replacement seal
Because the pump handles product, the specification had to suit food contact. We supplied a 32mm CA/SC/EPDM mechanical seal: carbon and silicon carbide faces, EPDM elastomers and 316 stainless steel metal parts, FDA approved.
Replacement seals for Chinese built pumps
You do not need to go back to China for a seal. A clear photo of your old seal and a few measurements is usually enough for us to identify a replacement to suit your pump.
Related: component mechanical seals | seals for food and pharmaceutical plant
Common questions
What seal does a Chinese centrifugal pump 304 LB5-1.5 use?
This 304 LB5-1.5 runs a single 32mm mechanical seal. The replacement we supplied is a 32mm CA/SC/EPDM seal: carbon and silicon carbide faces, EPDM elastomers and 316 stainless steel metal parts, FDA approved.
Can I get a replacement seal for a Liyang Sifang pump without going back to China?
Yes. A clear photo of your old seal and a few measurements is usually enough for us to identify a replacement to suit your pump.
Is the replacement seal suitable for brewery and food duty?
The seal supplied for this brewery pump was FDA approved, with EPDM elastomers and 316 stainless steel metal parts, to suit product contact.
Email your seal photos and measurements to office@acumenseals.co.uk.
Andrew Sykes MCGI, Director, Acumen Seals & Pumps Limited.
Solutions related to this article
If this failure mode sounds familiar, these are the products and services that usually fix it.
- Camlock SealsFEP encapsulated Camlock gaskets for cam and groove couplings in hygienic service.View details
- Cartridge SealsPre assembled seal units that remove setting errors on pumps, mixers and agitators.View details
- Encapsulated O-RingsFEP or PTFE jacketed O-rings for fluids that destroy standard elastomers.View details
Experiencing a Seal Failure?
Get expert advice and fast solutions from Acumen Seals & Pumps. With 36+ years of experience, we solve seal problems quickly and efficiently.
Director, Acumen Seals & Pumps Limited
Published on 2026-11-15
45 years in engineering and 36 years in sealing. Andrew specifies, supplies and troubleshoots mechanical seals, FFKM elastomers and pump sealing systems for UK industry.
More about Andrew


