Acumen Seals & Pumps Logo

Grundfos CR vs CRI vs CRN: What Is the Difference?

2026-11-17 • By Director, Acumen Seals & Pumps Limited
Share:

CR, CRI and CRN are the same vertical multistage pump built in three material grades. The hydraulics, the performance and the shaft seal arrangement are the same; what changes is what the wetted parts are made of. That matters for the liquid the pump can handle, and it matters when you order a seal.

What each version is made of

CR - the pump head and base are cast iron; the hydraulic parts in contact with the liquid are AISI 304 stainless steel. The standard version for clean water boosting and transfer.

CRI - every wetted part is AISI 304 stainless steel, head and base included. Used where cast iron must not touch the liquid at all, such as some drinking water and washdown systems.

CRN - every wetted part is AISI 316 stainless steel. The version for more aggressive liquids, including liquids with chlorides that would attack 304.

How to tell which one you have

The pump plate. The model code starts with the letters CR, CRI or CRN, followed by the flow size and number of stages - for example CRN 15-7 or CR 20-17. If the plate is unreadable, a photo of the pump and its connections is usually enough to tell.

What it means for the seal

The shaft seal is the same cartridge type across all three versions, and the seal code on the pump plate - the last letters of the model code, such as HQQE - identifies it. The pump material grade does not change which cartridge fits, but the liquid still decides the seal's face and elastomer materials. A CRN pumping an aggressive liquid may need different seal materials from a CR on clean water, even though the cartridge fits both. We check the liquid and the seal code on every enquiry before we quote. For what the seal code letters mean, see our post on Grundfos CR pump seal replacement.

Common questions

Is the seal the same in a CR, a CRI and a CRN?

The cartridge arrangement is the same across all three. The seal code on the pump plate identifies the exact seal, and the liquid decides the materials - send us the full model code and what the pump handles, and we will quote for the equivalent seal.

Which version do I need for a replacement pump?

Match what is fitted unless the duty has changed. CR for clean water, CRI where nothing but stainless may touch the liquid, CRN for aggressive or chloride-bearing liquids. If the liquid has changed since the pump was chosen, say so - materials are worth reviewing before you reorder.

Can you supply seals for all three versions?

Yes. We select and supply equivalent cartridge seals to suit the CR range, including CRI and CRN. Every enquiry is checked against the pump model and the liquid before we quote, so listing the range here does not mean every variant is covered.

If this failure mode sounds familiar, these are the products and services that usually fix it.

A

Director, Acumen Seals & Pumps Limited

Published on 2026-11-17

45 years in engineering and 36 years in sealing. Andrew specifies, supplies and troubleshoots mechanical seals, FFKM elastomers and pump sealing systems for UK industry.

More about Andrew
#Grundfos#Grundfos CR#Grundfos CRI#Grundfos CRN#cartridge seals#mechanical seal replacement

Share this article

Share: