Acumen Seals & Pumps Logo

Flygt Pump Mechanical Seal Replacement

2026-11-18 • By Director, Acumen Seals & Pumps Limited
Share:

Flygt submersible pumps are widely used for sewage, wastewater and drainage across the UK, and we are asked for their seals regularly. We select and supply equivalent mechanical seals to suit Flygt pumps, from small drainage pumps up to large sewage pumps.

The seals inside a Flygt submersible

Most Flygt submersible pumps have a twin mechanical seal - one inner and one outer seal, with an oil chamber between them. The oil lubricates and cools the seals and acts as a buffer between the pump casing and the electric motor. Many models have, or can be fitted with, sensors that alarm on water in the oil or liquid in the motor housing.

When the outer seal starts to leak, water reaches the oil and the oil turns milky or cream-like. If the inner seal then fails too, the oil - and any water in it - can reach the motor. A planned seal change at the first sign of milky oil or a sensor alarm is far cheaper than a motor rewind.

Identifying the seal your pump needs

Each Flygt model and size uses its own seal arrangement, so the starting point is always the pump itself. The model and serial number on the pump plate narrow it down. A photo of the old seal, or its shaft size and working length, settles it.

We check every enquiry against the pump model and seal details before we quote, so listing Flygt here does not mean every model is covered. Older and obsolete models are worth asking about - identifying unmarked seals is a large part of what we do.

Materials for wastewater duty

The fluid decides the materials. Sewage and wastewater duties usually call for hard wearing seal faces and elastomers that suit the fluid and any cleaning chemicals the pump sees. Tell us what the pump handles and we will match the seal to it.

While the pump is open

A new seal lasts longest on a healthy pump. Worn bearings or a worn shaft will shorten the life of any seal, so they are worth checking while the pump is apart.

Common questions

What seal does my Flygt pump need?

It depends on the model and size. Send us the model and serial number from the pump plate, plus a photo of the old seal if you have one, and we will identify the equivalent seal and quote for it.

Can you supply seals for older Flygt models?

Usually, yes. Older and obsolete models are a regular part of our work. A clear photo of the old seal and a few measurements is often enough for us to identify a replacement.

How do I know the seal is failing?

Milky or cream-like oil in the oil chamber, or a leakage sensor alarm, are the usual early warnings. If the pump is tripping or there is water where it should not be, stop it and get the seal checked.

If this failure mode sounds familiar, these are the products and services that usually fix it.

A

Director, Acumen Seals & Pumps Limited

Published on 2026-11-18

45 years in engineering and 36 years in sealing. Andrew specifies, supplies and troubleshoots mechanical seals, FFKM elastomers and pump sealing systems for UK industry.

More about Andrew
#Flygt#submersible pump#wastewater#mechanical seal replacement#twin mechanical seal

Share this article

Share: